Lift, skid plate, and wheels/tires for sale

I put a 6" lift on my truck (2010 Tacoma TRD Offroad) so these items are no longer needed and are up for sale.

1) 2.5" Pro Runner front lift w/ matching rear shocks and 1" block
SOLD
These were on the truck 11,000 miles and the truck had 37,000 when they were taken off. They are in full working condition with no leaking or damage. The Pro Comp Pro Runner shocks are their version of a Bilstein 5100 strut/shock with the same valving that Pro Comp paid Bisltein for. Ride was better than the stock TRD Off Road shocks by far. The front struts are fully assembled and ready for install with no need for a spring compressor at all.

2) Matt123's 10ga TRD stamped skidplate.
****SOLD*****
Skidplate was on the truck for about 6,000 miles and will not work with the 6" lift. I bought one of his last Grey ones and then painted it black. The scratches on the skid plate are from it being slid around on the garage floor. No dents or damage. Skid plate does not require any other brackets, just bolts to factory location.

3) Pro Comp Xtreme Alloy 17" 7036 black wheels with 285/70R17 BFG AT/KO tires
SOLD
The tires have 10/32nds left on them (New is 16/32nds) with no chopping, feathering, or any curb rash. These are the D load tires too. The wheels have no damage or visible scratches on them and I had them re-balanced a couple weeks prior to them coming off the truck. They are 17x9 with a 4.75" backspacing. These wheels/tires DO NOT have TPMS sensors in them and do not come with lug nuts. I am pretty firm on the price and if I do not sell them will use them on my trailer build in the next several months.

I am willing to ship any of the above anywhere in the 48 states and I am willing to drive a reasonable distance (roughly 1 hour 2 hour round trip) to meet up. I live in Davenport, FL (SW of Orlando right near Disney and I-4)
Shipping will be the following:
1)Lift - $35 anywhere in the 48 via UPS Ground
2)Skid Plate - $25 anywhere in the 48 via UPS Ground
3)Wheels/Tires - $100 anywhere in the 48 via truck freight. They will be banded and shrink wrapped on a pallet. Charge does not change whether business or residence.

You are more than welcome to make offers and/or trades, but I would prefer money and I am in no hurry to sell or in dire need of cash. I am leaving on a business trip this coming Wed (06/05) and will be back home Sun (06/09) so I will not be able to ship anything during that time frame. I will accept cash, PayPal, or in a week I can take credit cards (in person only) too. Any questions just ask and here are the required pictures.

2.5" Pro Runner front lift w/ matching rear shocks and 1" block




Matt123 10ga TRD stamped skid plate


Pro Comp Xtreme Alloy 7036 black wheels with 285/70R17 BFG AT/KO tires

 

How much for the skid plate shipped to 95126?

 

Item and shipping price are in the post...

 

PM'd you about skid plate

 

dibs on skid plate if mkemica doesnt get it

PM me

 

How did those Prorunner up front ride like

 

They ride better than factory and between my truck and my neighbors truck we couldn't tell a difference between my Pro Runner shocks or his Bilstein 5100 shocks. The lift amount was the same too. I have always run Bilstein on every vehicle in the past and I was very surprised and happy with the ride the Pro Runners had. They are not really soft, but more controlled than the factory struts/shocks. With the factory shocks I would drive 35mph down a dirt road and bouncing all over the place. Pro Runners made a big difference and had a lot more control on the same road. Hope that answers your question.

 

Thanks for the info

 

No problem.

I also need to apologize to BeaverNation as I made a mistake in reading my private messages in order. OldGeezer was actually first to "call/buy" the skid plate and BeaverNation is next in line if the sale falls through. I apologize for my error and mistake everyone, but I need to do right by OldGeezer who was first.

 

Bump

 

Willing to part the 1" lift block and U bolts?

 

LIFT STILL AVAILABLE? IF SO ANY PICS OF IT ON YOUR TRUCK!

 

OP, were you running this lift with your stock UC's? And if so, were you able to get everything aligned?

 

No, selling complete.

 

Lift is still available. Same with wheels and tires. This is a picture of both on the truck

 

I was running with my stock control arms and there was no issue aligning the truck.

 

Oh yeah I recognize This truck you're the guy with the million LEDs!

I bet it looks sick with a 6 inch lift!

 

It looks good for sure.

Bump for sale.

 

bump.

Lift and the wheels/tires still for sale

 

skid plate still available? if so will it fit a 2013?