1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Lifting my base model nonprerunner

Discussion in '4 Cylinder' started by ArmyTacoGuy, Jan 19, 2012.

  1. Jan 19, 2012 at 6:51 PM
    #1
    ArmyTacoGuy

    ArmyTacoGuy [OP] Well-Known Member

    Joined:
    Dec 7, 2011
    Member:
    #68325
    Messages:
    72
    Gender:
    Male
    First Name:
    Jacob
    Naples, FL
    Vehicle:
    06 Regular Cab 2wd 2.7L
    black rim mod multi color LED's on floor boards Blacked out tail lights and headlights black emblems and white one in grille Police grade siren and PA system Glass Pack bull horn wired to radio in cab 10'' Kicker Bass House custom made intake hellogen bulbs Roof running lights aftermarket head unit
    Well fellas I ended up putting shackles on the rear part of the leaf springs and ended up with about 4 inches of lift without effecting the front angle of my axel so I won't tare up u-joints, just gota clean it up a lil, cut of the unessasairy parts of the shackles I chop the exhaust after the hanger cause it was in the way of the leaf spring which them lower, definantly some redneck enjinuity lol rides stiff as a bored! Sugestions on longer shocks to put on the rear? Now suggestions on simple ways to bring the front end up bout 5 inches with out spending damn near 600
     
To Top