Lifts

Rough Country 3.5 lift with Vision Razor 20x12 -51 offset and Atturo Trailblade XTs 305/50r20...No Vibration.

 

So just to double check 265/70/17 tires with -6mm offset on stock Tacoma with spacer (1 inch spacer but adds two inches) on front to level 2022 Toyota Tacoma TRD off road will clear?

 

Yes, that size will even clear stock, so you don't even need the spacer lift.

 

One other question, when I take the rough country control arms off and the hardware that it came with, will that also fit my stock Tacoma control arms? Or do I need to get hardware to fit? For a 2022 TRD off road Toyota Tacoma. I was told the hardware that came with the kit would fit my stock control arms but I wanted to double check?

 

Hardware is the same for UCAs

 

Where do you feel the shaking?

 

In my seat and I see the passenger seat shaking and from the back

 

Most of us do, it’s common.

 

Before you wave the white flag, I would highly recommend you try these shims. I had a vibration very very similar to what you describe. Annoying as hell and definitely *not* normal.

I had my original wheels and tires and the problem persisted, so I knew it wasn't wheel related.

Did the carrier bearing drop. Nothing.

Stumbled across these 3 degree shims on this forum here. PROBLEM SOLVED. Completely eliminated my vibration. 55k miles later and it is still buttery smooth.

Good luck!

 

I just assumed whoever installed the lift kit for OP would install shims..that's were the shaking/ vibration is most likely coming from.
If the shims are ineed installed then maybe they were installed backwards.

 

Thank you!

 

Do the stock Toyota shocks also take the same hardware as the lift kit hardware?

 

I highly, highly doubt those shims came with your lift kit.

For $33 I would order a pair and install them or have them installed.