Light setup I had on my 2010

Nice!

 

I want to do this now!

 

Most lights on one truck competition lets go!

 

Nice,

Did you wire the rear bumper lights into the reverse lights or are you running a separate switch? I'm looking to do something similar on my 3rd gen, but am conflicted as to which approach to take.

 

You can do both. I was thinking the same but ended up just wiring it to the reverse. Didn't feel like running the wires.

 

I wired my flush mount reverse lights to my tailight.
I didn't like the idea of running wire to my cab just for a 3way switch.

Got enough switches with fog cubes..32" bar..Ditch lights and a 52".

 

Fair enough.

Thanks

 

Snake the wires up the bedsides up behind the tail lights and crimp spliced them in. Took about 5 minutes after i had the pods bolted in.

 

I have a 50" curved in the garage, but im scared of drilling into the roof.

 

Don't do the roof light bar, you'll regret it like I did later, but up to you, I didn't like drilling into my roof, even with silicone it still leaked side my cab

 

I have a Baja design onx 6 hi power 40", 20" S8 in the bumper along with a pair or squadron pros in the bumper and on the hood mount and S2's all the way around for camp lights

 

I drilled into my door jam.
Rain...snow ..no issues.
I love the look..sits nice and low on windshield. Guess it's all about how it's done and rather the owner likes the look

 

I just ran my wires down beside the windsheil in the crack. You and others will hardly notice it

 

Yes...me and others have done it that same way for many years.

The only drilling most do is for mounting the brackets

 

I dig your roof single row bar, lemme guess 350$?

 

If the hole is closed up with silicone their should be zero issues. did it stop leaking when you took off the bar?