Lighting the interior of Camper shell

Hello all!

I've recently purchased a Snugtop Hi-Liner for my '10 Tacoma 5ft bed, I was curious how you all found the best way to put up light's inside the shell? I currently have purchased some LED light strips off Amazon that came with a wiring splitter, switch and is basically ready to wire together. I was mainly seeing if you think the adhesive on the back of the strips will suffice on a carpeted shell or should I drill some clips into the shell to hold the lights on better?

 

My shell is lined with carpet and Velcro sticks right to it so that's what I did.
Here's a good thread on shells.
https://www.tacomaworld.com/threads/show-me-your-shell.13598/

 

Welcome to TW

 

awesome! I'll definitely try the Velcro, I assume you just put the adhesive sides together from the lights to the velcro and just used the sticky velcro side with the carpeting?

 

Yep.
Here's another shell thread I like.
https://www.tacomaworld.com/threads...eping-platform-drawer-storage-systems.424709/

 

definitely Velcro on the back of the strips. Will stick great to the carpet.

I used the long LED ribbon, but with haveing no carpet had to rig up a mount system with perforated metal flat pieces mounted to the window screws.