1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Lights Stopped Working

Discussion in 'Lighting' started by Tacoma_Joe2024, Jan 19, 2024.

  1. Jan 19, 2024 at 7:01 PM
    #1
    Tacoma_Joe2024

    Tacoma_Joe2024 [OP] New Member

    Joined:
    Jan 17, 2024
    Member:
    #441870
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2023 Tacoma TRD Off Road
    I’m no expert on wiring and quite frankly it is my first time installing additional lights to my truck.

    So I have KC Flex Era 3s as ditch lights. Installed them, had the battery disconnected, took out the inline fuses and disconnected the relay while I messed with all the wiring. Got everything put back together, plugged them into the stock switch and the lights were working great. I ran the wires through the firewall so I could attached the wires to the switch (that it came with), however once I connected this time they did not work. Any theories as to why this would be? I checked the fuses and they show no indicators of being blown. Connection to ground and battery are solid.
    Thank you for the help!
     

Products Discussed in

To Top