Long Travel BS Thread

If Super short on time and need them asap, you can come cut the ones of my old rear end lol its in walnut. Or try solo Im pretty sure they have them.

 

The one in Compton is one of their distribution centers - like 10 minutes from my place with no traffic! Hopefully I’ll find a place that carries fabbed ones for sua like ruff stuff so I don’t have to mod for sua too much.

@Tbasch thank you man - I’ll call and see. My axle had factory ones I could cut off and use for basic mock up - I’m just trying to see where it will be in relation to something I’m making.

 

Camburg has them

 

Not that it matters but does, has anyone heard about how the dirt designs 3 link drives on the street?

 

Could pm Joel @jjhitchen ,or ask Alex @tacoma510, Ryan @slocal_taco on IG. Not sure what their names may be on here.

or pm Steve himself @dirt designs

 

with the Heim upper arm. To gain even more caster i would lengthen the forward (front of vehicle) heim which would in theory push the top of the spindle farther back, is that correct?

I have the taco tabs on the LCA cams at max caster and neutral for camber. Wanting to dick with it some more now and get all the caster i can squeeze out of this kit.

 

Sounds accurate - can't remember. It's opposite of the LCA I believe.

 

thats what i thought as well to create the \ angle for positive caster. I just have to make sure i dont bring it too far out to mess up the camber.

My alignment is pretty dialed otherwise. It does have a little wandering moments but nowhere as bad as my BK kit.

 

Anyone have takeoff 6' bedsides and/or passenger front fender for 05-15? Paint code 1E7 (Silver Streak Mica) preferred.

 

anyone have an extra rear axle(whole assembly) laying around? lol. got in a car accident a few weeks ago and the axle is bent.

@Tbasch old rear end in working condition?

 

I’ll have white 6’ bed sides in about a months time. Caps included.

 

Send me a PM when you remove them!

 

What’s taking so long? Going on 2 weeks and still only have the one side done

 

So how bad does 4” glass look with a plate bumper? I have relentless fab

 

@DannyBFresco ?

 

Front or rear?

 

Front

 

Badass

 

It's not horrible.

I have some photos in my build thread. https://www.tacomaworld.com/threads/buyobuyos-build-thread.511891/page-6#post-17771190

 

I'd cut some 3/16 or 1/4 plate to make extensions.