1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Looking for bed measurements from Xtra cab

Discussion in '1st Gen. Tacomas (1995-2004)' started by EKjimmy, Nov 16, 2013.

  1. Nov 16, 2013 at 5:31 PM

    EKjimmy [OP] Member

    Nov 16, 2013
    First Name:
    NSW, Australia
    4x4 Hilux SR5
    Tube front bar with lights, ARB rear step/tow hitch bar, tube side steps, roll bar with lights, 2" suspension lift, bed liner, dual batteries, sound system
    Hi all,
    After having a good search around, I can't seem to find the measurements i'm after.
    I have an 03 Xtra cab hilux (similar to your 03 Taco xtra cab long bed).
    I'm looking to buy a soft tonneau cover from the states as the ones we get here have ugly elastic loops that go over hooks you have to rivet to the outside of the bed =:puke:
    Im after measurements from the inside top edges of the bed sides (measurement D in photo), and the outside top edges (C), as well as the inside top edges from front to back (A), and outside top edges (B).


    My measurements are as follows:
    A = approx 1840mm (72.44")
    B = approx 1920mm (75.59")
    C = approx 1550mm (61")
    D = approx 1450mm (57")

    If someone with a long bed could take some measurements for me, it would be much appreciated.


    PS Sorry if there is another thread with this info, I just can't seem to find it.
To Top