LR UCA and rubbing

Hi,

I'm ready to install my LR UCA. Actually I currently have 305/70R16 on 4.5 backspacing wheels. I worried to get some rubbing on the LR UCA with the zero (0) initial setting as many do here. Will it rub or not? With stock UCA there is enough room. If I get some rubbing. Can I flip the upper ball joint and put it full backward to get more clearance?

Thanks.

 

I thought aftermarket UCA's gives you more clearance so if you don't rub with stock UCA's, then you won't with the new ones.

 

I have mine set all the way out and 0 caster. Stock Or wheel/tires I can put more than a finger between the tire and UCA. SO if you push it our more is should be ok. But 305s are wide. Some on TW have had 305s work just fine.

 

Ok thanks... Actually with stock there is space.