1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Method NV center bore size

Discussion in 'Wheels & Tires' started by magnetic4x4, Jan 12, 2017.

  1. Jan 12, 2017 at 10:09 PM
    #1
    magnetic4x4

    magnetic4x4 [OP] Well-Known Member

    Joined:
    May 23, 2016
    Member:
    #187721
    Messages:
    125
    Gender:
    Male
    Vehicle:
    2013 Magnetic Gray DCSB XSP-X 4x4
    I recently got some 18x9 Method NV wheels, and I'm having an issue with centric rings. Wheels are listed to have a 108mm bore, so I got some aluminum 106-108mm centric rings. Went to put them on tonight, and they fit tight on the truck, but when I put the wheel back on, it fit loosely and was definitely not centered. The ring actually measures 108mm OD, and the center bore appears to be 109mm. I measured another wheel and it was the same. Has anyone ran into this issue? The steering wheel has a shimmy that it didn't have before I put the wheels on and I know the tires are fine because they were on my old wheels and they rode smooth.
     

Products Discussed in

To Top