Morimoto LED Amber Fog Lights **IN STOCK**

What’s going on in pic 1 and 3? Do you still need to adjust the fogs, looks like they Are bleeding into the low beams

 

In pic 2 you mean?
1 and 3 only have the fogs on..
But yeahhhh I only threw them in during the day and didn’t finalize any adjustments yet

 

Oh no, it seemed like pic 3 was adeeper amber. I just installed mine today, need to make some slight adjustments still

 

I need to find a flat wall and some distance to finalize everything. The only thing I’ve noticed comparing to my stock 2n1 led fog was the cutoff line isn’t as sharp with these (it has slight humps)


I did remove the grill and the side shields for easier access. Now I need some @mesojdm amber drl board specials

 

My bad I forgot to add, hilo side of big island

 

Can someone show me an example picture of how these should be 'properly' aimed, i just want to compare how i did them.

My low beams are like 6" to 1foot above the beam of the ambers. I eyeball aimed them to where the oem fogs were.

 

It's just your judgement, but I generally set my fogs to pick up where the low beams taper off at the bottom to help out there.

 

Got mine thrown in today, 10 minutes, installed from the top.

 

god dang, i really wish i could have found a MT quicksand MGM is aight

 

I got mine in last week and put them in and haven't gotten around to share some pictures but these things are awesome!!! Very happy with their performance in the rain and can't wait to get some snow!! Thank you @kustom54lighting for the discount code and fast shipping!

 

They worked great in snow until the lens got covered in snow haha

 

is it me or they look more orange red then amber

 

I dont think it’s a orange red, but it is strong… I’d say more pure amber rather than a “watereD”down amber

 

thanks for all the pics!

 

Their output wavelength is 599nm. I think it is just their output spectrum is pretty narrow which can make them appear that way. You can see more info on them at post #564 here:
https://www.tacomaworld.com/threads...fog-light-review.554813/page-29#post-19408787

 

Save yourself some trouble of finding the polarity by plugging the pins in first. I had plugged them and couldn’t back them out of the plug( only because I didn’t have something small enough to separate the clip inside the plug).

 

I used a multimeter.
Green colored wire was the hot wire

 

Damn these are tempting. Any pics on an inferno truck?

 

Red and green go together

 

Well when you’re color blind that doesn’t help me out much lol