Moto Metal 962

Finally found the wheel I think looks good...have them in my cart $1,398..

Before I buy ...just want to know if they'll fit any advice will be appreciated.

Their the Moto Metal 962 ...
17x10 6x139.7 -24mm offset ...106.2 center bore..

I have 265/65r17 Nitto Grapplers to put on these wheels...

Give me some good news pleassee..

 

Those will rub on stock suspension. Good luck!

 

How bad?

 

I can get these for $800 from a relative,their like new.

 

They are pretty wide. 10 inches wide. And they stick out pretty far. So the further your tires are are, the more they will dig into your cab mount, or your bumper. They have a bigger radius to do.
Idk if that makes sense.

 

Been told by several reputable tire/ wheel dealers locally and online that for a 265/65 17 a 17x9 -12 will fit no problem with no rubbing.

Wouldn't a 17x10 -24 ...be a half inch wider on both sides and a half inch more lip?

This s**ts confuses me...

If that is it ...how does a half inch cause rubbing...seems so small.

 

265/70/17 with a 17x9 -12 wheel rubbed a lot for me stock, even with a 1.5"~ lift...just saying. You'll need to trim a little if you wanna make it work.