My on going build!

Hello all, I entered this forum with a nice 2015 white tacoma with a minor lift, however I decided to sell it in search of something less new and slightly cheaper. Then I came across this beauty on here and just couldn't resist. So I am the proud new owner, well for a few months now, of this amazing truck that seems to have been passed around. https://www.tacomaworld.com/threads/sold.438572/

I am lucky now to have a great starting point that I can customize as I want and keep the things I like!

This is the list of things done to the truck based off of the ad for the truck

Truck options:
-Sport package
-power windows, locks and mirrors
-tilt wheel
-roof rack
-400 watt inverter w/ 110v outlet in bed

Drive Train:
-4.0L V-6 stock, running mobil 1 synthetic
-6 spd manual transmission
- dual transfer cases
-inchworm crawler w/ 2.28 gears
-inchworm lefty transfer case w/ 4.7 gears and twin sticks,
-marlin 30 spline front and rear outputs
-single piece HD rear driveshaft with double cardigan, recently replaced the u-joints
-ARB rear air locker
-all breathers extended up with added filters

Wheels/tires:
-mickey Thompson classic lock 16x8
-GY duratracs 285/75R16 3 basically brand new with the 4th near new as well
-full size spare and matching rim
-M/T faux beadlocks paint in blue and a black set for wheeling

Suspension:
Front:
-fox 2.0 remote resi. coilovers with newer springs about 7k on them
-total chaos uniball UCAs
-sway car removed (still have and included)
Rear:
-OME EMU Dakar leaf springs also have around 7k miles on them
(OME Dakar extra leaf for each side included but not installed)
-bilstein 5125 shocks
-ATO shackle flip
-braided stainless extended brake lines

Armor:
-ATO front bumper
-4x innovations DOM weld on sliders w/ kick out
-Rear ATO wrap around high clearance bumper w/hitch, flood lights, shackle mounts, hi-lift notches, bedside protection, tire carrier, rear winch mount
-ATO HD front skid plate
-ATO HD transmission skid plate
-ATO gas tank skid plate
-ATO HD crossmember
- 1 3/4'' custom tube skid/cross member for the dual cases w/ trail gear HD mount

exterior mods:
-front, middle and rear halogen rock lights (not currently wired)
-black billet grill w/ hood scoop insert
-black headlight mod
-newly welded custom exhaust crossover
-new flowmaster 40 series muffler
-underbody LED strips (need re wired)
-Hi-lift mount on passenger side bed (no hi-lift included)
-viair 450 constant duty compressor mounted in driver side bed cubby
-2.5 gal air tank mounted under bed, air chuck fitted inside bed
-custom fold down tailgate/table
-Toyota rubber bed mat
-vent visors on all 4 doors (passenger side front needs a new one)
-20% tint on front windows (rears tinted also)
-sockmonkey hoodscoop blackout
-safari snorkel system
-vision X 6500 HIDs

interior mods:
-weather tech floor liners front and rear
-Toyota door sill guards
-blue led floor accent lighting tied in with dome light
-two 110v outlets on rear of center console w/ 400 watt anytime mod
-12v cigarette plug and 5v usb plug on rear of center console
-mag light holder mounted on driver side rear door
-uniden pro 520xl cb (not hooked up) speakers wired in above drivers head
-blue blacklight gauge cluster w/ white needles
-blue blacklight on window switch, steering wheel controls and clock
-aeroforce interceptor gauge and air pressure gauge mounted in A pillar gauge pod
-carling switches left of steering wheel and overhead console for controlling options
-2 painless wiring fuse blocks mounted under hood w/ painless wiring relay bank
-wet okle seat covers front and rear (fronts have built in seat warmers)

Audio:
-New Kenwood DDX773BH in dash touchscreen DVD player, Bluetooth, XM compatible, ipod/iPhone cord (can switch it out for other phones)
-rear back up camera
-front rock camera (not currently hooked up)
-pioneer premier TS-c720PRS front components
-pioneer premier TS-D601P rear 2 way speakers
-eclipse XA4000 4 channel amplifier under drivers seat
-New 2 10" kicker RT subs
-New kicker 800.1D amplifier
-Mr.Marv speaker adapters used on the doors
-elemental design sound deading on all doors and rear cab wall.

Unfortunately about a month ago the t case went out, so the truck has been in the shop waiting for a new one to get in! Bummer on the case because I was hoping it would last a lot longer and my wallet took a hit, but I expected to have to fix some things with a used truck. On the plus side my Pelfreybilt hybrid bumper got in a few days ago so it will have a nice welcome home present! Pictures should be up here shortly!

 

Well, that's a nice start!

Welcome!

 

It is definitely a nice start! Haha! It definitely has been used as a truck and requires some minor things be fixed as some of the wiring seems to be coming loose for the lights and I might have to replace a headlight, but I have always wanted halos so it would be a good reason to upgrade. Other than the t case, it drives amazing and should be up and going hopefully next week!