My Tacoma TRD A/C build

Hello everyone, been on here a lot but finally got around to making an account. Thought I would post all my mods I had done all in one post, if you have any questions on any of them feel free to ask.
I currently have a 2013 Tacoma TRD access cab changes are as follows:
New tires : Bridgestone dueler at revo 2 p265/70r16
Switched from BF all terrains LTs that came with the truck new
Front window tint
Weather Tech smoked window deflectors
Flow master 40 series muffler
Dual 10 inch subwoofers and amp installed
Built box and installed myself
2x250w Memphis audio subwoofers with 500 watt amp
Now the best part, pictures!!!!!
Factory tint in the back(tint is in the glass), film tint in the front, had a problem with this due to when you match it by color, the light allowed in does not match (the back let in more than the front giving it a weird lighting almost glow from the back), so the current set up is the closest that I could get to the amount of light allowed in as you can see below its pretty close 2 10 inch subs in a self-built box. Not ported or anything but it works pretty well, called a few places to see if they would build it for me with no luck so I built one myself. Full functioning back seats, just lost the rear center thing. I've build probably 4 other boxes before for other cars and this was the second hardest.

Just finished carpeting last night so I need to clean up this wire port
Amp cover (vented) so I can carry passengers or place stuff behind my seat without it damaging the amp or heating up the cargo. Only place I could put it other than in the driver or passages seat by cutting out the foam.