NC MOD/COOKOUT DAY (WINSTON-SALEM) Picture Thread

Thanks man! That is awesome!!

 

Ok fellows got a ? the wife gave me the ok on a lift since the chances of me getting a double cab are out of the picture so id like to have maybe a 3" lift and was wondering what i would need ive looked at the toytec lifts and i guess my ? is out these two lifts what would you'll go with this is the one with springs and spacers in the front and add a leafs in the rear And this is the one with spacers for the front and add a leafs for the rear And with either lift would i also need 5150 for the front??? Thanks for the help!!

 

Honestly man, I would save a little more money and go with this kit
It's gona ride a lot better and the suspension will last a lot longer.

 

04taco i looked at that one and seen that they offered assembly of the front shocks and springs with new bushings for a hundo more ill have to see if i can talk her into it tell her it will last longer!! Thank 04taco!

 

You can get a set of 5100's for Down South for about $300, than get the Toytec add a leafs ($79) and some decent springs for the front ($149). It would be around $530 + shipping. Maybe add some upper control arms.

 

No problem man

 

Wait what?!

Edit: You bastard...

 

My Mac no respondo to control + f4

 

This was my route(if you remember that mag grey rig) I also put some Eibachs up front to stiffen things up, but you don't have to even do that, especially if you want your 5100s to be higher than 0.85

 

I checked out some total chaos uca's and they where around 600 if I was looking at the right thing! Do you have to have the uca's?

 

One day, sir, I shall get you back

 

It depends how high you want to go. I have mine set at 1.75 and TSB leafs done, and have no issues. If you want 3" you might need control arms. I would say get a set of 2" springs set the 5100's at 0 and get an add a leaf for the rear. (basically the setup I posted above)