Need a ball joint tool FOUND ONE PLEASE DELETE

Anyone in the riverside area that i can barrow ball joint tool to install my UCA 's ? I don't want to take off my spindles to have then press out shops want to charge me $70 - 80 have then press out .

Or a good auto parts that would have the right set that i can barrow one .

thanks in advance

 

Are you swapping out oem for aftermarket like total chaos?

 

Yes oem for JBa's

 

You dont need to do all that. Just hammer the spindle and your good to go.

https://youtu.be/HjAqneTSDys

 

I got a 03 ball joint is press in to spindle

 

O. Didnt realize its an 03.

 

You can probably get one loaned out to you at Autozone.

 

Pitman pullers work great on ball joints and are only ~$15, can get them at any auto parts store, Harbor Freight has them for cheap.

 

Yea ima check my local AZ if not pitman would be the one .

 

Any especial pitman puller @eon_blue you did your with

 

TBH I haven't messed with the upper ball joints using one, but the Pitman Puller I got from Harbor Freight worked great to pop out my lower ball joints and my outer tie rods.

 

Pickle forks are even cheaper and work well, but only if you don't intend on reusing the ball joint you're taking out. Pickle forks will ruin the boots

 

I see ill try Az hopefully they have a set that would work out for me i don't want to pay a shop to press then out if i can do it .