Need advice on new wheels

Hi all. I have a 2013 Tacoma double cab short bed 4x4 SR5. I have leveled the front 2.5 inches and put 2 inch blocks in the back. I upgraded size to 265/75/R16s after the first set went bad and I like that size. Looking at getting new 16x8 wheels with the next set of BFG All Terrains and the ones I like say they have a -6 offset. Will that make the stance of the truck wider? I've tried to figure it out on my own and am having trouble. Looks like the stock wheels have a positive offset.

Thanks

 

6mm equates to almost 1/4”

So, a -6mm would “poke out” 1/4” more than a zero offset wheel.

 

also welcome to TW!

 

Check out this thread to find out more info on your stock wheels, so you can understand what a -6mm offset will look like
https://www.tacomaworld.com/threads/wheel-specs.30754/

 

And add another 1/4'' to 1/2'' of poke due to the 16x8'' wheel being wider than the factory wheel. If the OP finds his wheel at the above link, he can see how wide the wheel is. Half of the increased width goes towards poke.