1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need help with 2006 bucket seats install in a 2010?

Discussion in '2nd Gen. Tacomas (2005-2015)' started by PRE10, Dec 23, 2011.

  1. Dec 23, 2011 at 7:40 PM
    #1
    PRE10

    PRE10 [OP] Well-Known Member

    Joined:
    Dec 15, 2011
    Member:
    #68818
    Messages:
    48
    Gender:
    Male
    SoCaL
    Vehicle:
    2010 PreRunner 4Banger
    Alright guys I need your help. I and another member on here are going to swap seats. I have a 2010 regular cab with airbag bench seats and he has a 2006 non airbag with buckets. I know for him on his 2006 its just simple install and go, but for me on the 2010 I need to trick the air bag and do some other stuff.

    From my understanding I need to run a 3.3 ohms resister in the yellow cord under the seat so that the air bag light will not come on right?

    Other question is there a way to take the airbag system off the 2010 bench seat and install on the 2006 non air bag seats, instead of running the 3.3 ohms resister. Also is there anything else I have missed that I need to do?

    I searched and read all the seat swaps post but still have question. Thanks:D
     
  2. Dec 24, 2011 at 11:59 AM
    #2
    PRE10

    PRE10 [OP] Well-Known Member

    Joined:
    Dec 15, 2011
    Member:
    #68818
    Messages:
    48
    Gender:
    Male
    SoCaL
    Vehicle:
    2010 PreRunner 4Banger
    Anyone have any info on this thanks
     
  3. Dec 27, 2011 at 6:43 PM
    #3
    PRE10

    PRE10 [OP] Well-Known Member

    Joined:
    Dec 15, 2011
    Member:
    #68818
    Messages:
    48
    Gender:
    Male
    SoCaL
    Vehicle:
    2010 PreRunner 4Banger
    BUMP
     
  4. Dec 28, 2011 at 8:55 PM
    #4
    PRE10

    PRE10 [OP] Well-Known Member

    Joined:
    Dec 15, 2011
    Member:
    #68818
    Messages:
    48
    Gender:
    Male
    SoCaL
    Vehicle:
    2010 PreRunner 4Banger
    BUMP
     
  5. Dec 28, 2011 at 9:27 PM
    #5
    4X42HEL

    4X42HEL Don't really understand 2WD trucks....

    Joined:
    Jul 25, 2010
    Member:
    #40716
    Messages:
    353
    Gender:
    Male
    Albuturkey
    Hot Wife
    Good luck.

    Hope all goes well with this conversion. If those bags deploy, that will be a bad situation....
     
  6. Dec 29, 2011 at 1:28 PM
    #6
    PRE10

    PRE10 [OP] Well-Known Member

    Joined:
    Dec 15, 2011
    Member:
    #68818
    Messages:
    48
    Gender:
    Male
    SoCaL
    Vehicle:
    2010 PreRunner 4Banger
    Thanks
     
To Top