1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

need help with pioneer avic x940bt install in 2013

Discussion in 'Audio & Video' started by tstout23, Apr 16, 2013.

  1. Apr 16, 2013 at 1:09 PM
    #1
    tstout23

    tstout23 [OP] Well-Known Member

    Joined:
    Sep 30, 2010
    Member:
    #44034
    Messages:
    72
    Gender:
    Male
    Vehicle:
    2013 access cab sr5 4x4
    i am a noob and for my first mod i am installing a pioneer avic x940bt navigation unit in my 2013 tacoma access cab sr5 4x4 v6. i have a few questions a long the way as this is my first time doing this. i believe i have ordered everything to make this as easy as possible. i have the pioneer avic x940bt harness and metra 87-up toyota harness completely soldered up except the "reverse gear signal input" and "car speed signal" wires. im not sure what to do with them. what size are the speakers in the front doors and rear doors?

    I ordered this kit to override the parking brake

    http://www.amazon.com/gp/product/B008I5S4AW/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

    I already have axxess aswc-1 kit for the steering wheel control and also ordered the turbowire harness for easier installation. i am not sure on installation of either of these in conjunction with my head unit

    http://www.amazon.com/Axxess-ASWC-1-Universal-Interface-Connector/dp/B00B4PJC9K/ref=dp_ob_title_ce

    http://www.amazon.com/gp/product/B0064J4LOM/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
     
    Last edited: Apr 16, 2013
  2. Apr 16, 2013 at 2:27 PM
    #2
    otenba

    otenba Member

    Joined:
    Apr 16, 2013
    Member:
    #102212
    Messages:
    16
    Gender:
    Female
    honolulu
    Vehicle:
    '10 trd off-road
    borla exhaust, trd exhaust tip, k&n intake, minor stuffs
    i just installed a 3200bt and left the reverse gear one taped off. i didn't have a car speed one. the reverse gear one is just if you're going to hook up a back up camera so that it knows to show the video. there were a couple other wires that weren't applicable for what i was doing so i just taped those off too.
    for the parking brake, i followed this guy's instructions:
    http://www.youtube.com/watch?v=lDGZEZrUdRo

    gl
     
  3. Apr 16, 2013 at 8:46 PM
    #3
    tstout23

    tstout23 [OP] Well-Known Member

    Joined:
    Sep 30, 2010
    Member:
    #44034
    Messages:
    72
    Gender:
    Male
    Vehicle:
    2013 access cab sr5 4x4
    i ended up just ordering the parking override kit off amazon for $10. still have other questions about the installation of the axxess steering wheel controls.
     
To Top