Need help with Tire Pressure Monitoring System (TPMS)....PLEASE!

Hi all!

My 24 Pro came from the dealer with 48 pounds of air in each tire. According to the sticker in the door jam, they should be set at 30 pounds when cold. Therefore, I let out 18 pounds of pressure at each tire. Well, now I get warning lights in the dash and buzzer advising to check the tire pressure. Argh!

I read the manual (begins page 504) and there is approximately ten pages of info on the TPMS system most of which is written in a language I cannot understand. Because of this....I need help from a fellow TW member!

Does anyone know, and can explain to me, the manner to reset the four TPMS sensors so 30 pounds of air does not activate the emergency warnings in the dash? I'd surely appreciate any assistance anyone can offer me!

Thanks all!

 

Earlier models have a reset button very low on the driver side of the dash

I'll guess you do too. If I'm wrong, it cost you nothing to look for it.

 

There is a YT video that covers it but I have been watching so many I can’t remember the title but search something like “2024 Tacoma dash tutorial”

steering wheel buttons get you into the menu on the dash where you can adjust the TPMS warning to be 30,32,35,40 psi.

 

Nahh.....The 2024 trucks use a convoluted system. You have to go through the display screen.

Pages 537-539 in the owners manual.

I'd post the steps, but I need to know what screen size OP has.....?

 

MID settings , vehicle settings , TPWS settings, tire pressure setting

 

Never mind....I finally figured it out! Not sure what I did, but it fixed itself. You guys are the best!!!!