1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need some conversion help.

Discussion in 'Audio & Video' started by BluTaco08, Sep 19, 2009.

  1. Sep 19, 2009 at 11:31 AM

    BluTaco08 [OP] I LiKe TaCos

    Jun 15, 2008
    I'm trying to figure out what size box to build for my current system setup that is on the way. I've got an 08 Reg. Cab and I'm going with a single 10'' Pioneer Premier Shallow Mount (TS-SW1001S2 is the part number at crutchfield.com).

    The sub requires 3" of mounting depth, and .35-0.7 cubic feet in a sealed box and 0.5-0.7 cubic feet in a ported box. More than likely, I'll be going with the ported box.My question is what dimensions should the box be ? I'm not good with math at all and the conversion charts I've found only confuse me more. :der: Anybody have some suggestions for box size ?

    I need to know specifics in inches if possible. Please enlighten me.

    Also, with a 4ohm woofer I can run a 4 channel amp correct ?
To Top