Needle bearing labor

Also, your comments? I put a 3/1 lift. 285/75/16 or 265/75/16?

 

Almost certain 285 will rub if you have factory UCA’s, and are using factory wheels. Even with a spacer you may need to CMC. I could be wrong there, that’s not my area of expertise. Someone here will chime in I’m sure.

I’m running 265/75/16’s without issue. 2.5” squared. I’m about to get some methods, and pair them with a fresh set of Nittos. Aiming to get a .25 poke. Personal preference.

 

Pics of 265 vs 285? With lift

 

I recently drove 500 miles or so before I could replace it and it was vibrating like crazy but surprisingly wasn’t completely gone when I removed it (but had noticeable play).

 

I drove on mine for over a year with the vibration.

 

Where are you in NJ?

 

hudson county

 

Anyone have the tool I can rent or borrow?

 

I think I spent only $250 at my local offroad shop to get the ECGS bearing done.

 

Another question, taco lean? Can I use 2 different size blocks in the back to fix this?

 

Hi Dave, I will PM you for more info.

 

$220, not including the bushing, which I supplied.

 

I was quoted $500 CAD ($369 USD) by a local shop who specializes in Toyota's. This was parts and labor. I did it myself in the garage with my brother. It can be a bit tedious though.