New '18....What to check

My ’18 Sport 4x4 has less than 300 miles on it and looking to do some of the “check it out/you should do” items
often found mentioned on this forum. Searched the past posts, checked out the “sticky’s” and here’s what
I come up with to do……
If anyone has another to add…or a correction based on ‘it’s an ’18 and don’t need to do it” please chime in.
(BTW assume the dealer actually did the PSD/PDI but don’t hurt to self check these……

1. AT fluid level (little involved but w the info in past posts think I can handle it).
2. Diff (front and rear)fluid level
3. Transfer case fluid level
4. Leaf springs u-bolt tightness/torque
5. Grease the 2 zeros on the front d-shaft
6. Re-torque the front and rear d-shaft universal bolts
7. Missing anything?

Input any appreciated
Thanks….

 

It's a brand new truck. Don't screw with it. Make the dealer do it.

G.

 

Sorry but I'm a worry wort.... plus It's sorta fun to work on a new truck vs the rust bucket frame
on the '07 i just sold.....
Never one issue in 11 yrs I had the '07. Was a great truck .... Hoping the '18 is near that good....