New England Mod & Meetup Renaissance group

Pms will go out shortly. Will send my address in the pm a day or two before the meet.

Literally down the road from Collinsville center.

 

Other side of the river?

 

Other side of the Farmington from the center of Collinsville, yea. Its a tiny town, so if your trying to figure out directions just reference crown and hammer or something else in the middle of town. Its a difference of a mile at most.

Not trying to farm out my address on the internet or to strangers. Ill send it in the pm when we know weather is cooperating and were good to go.

 

What's that job entail?

 

Totally understandable. I’ll leave the Jason mask at home.

 

You have the tool to press out the bearing?

 

Have to remove inner rear axle and press off the old and press on a new. I bought a new loaded half axle to get around needing the press.

For the press you need a special jig and 20t press and truck is down while work is done.

Never done it before so should be a good time.

 

No, plan is to put in a new loaded driver rear axle then rebuild the oem...I like spare parts

 

I saw a guy put in an independent rear axle (corvette) in a ‘ stang so anything is possible

 

Bwahahahaha!!!!! The best laugh was the ongoing vulgar language and frustration all over the monitored communications.......

 

I didn't know you can get loaded rear axles. My drivers side has been leaking for some time.

 

It's Dorman... thus my plan to rebuild the oem at leisure

 

Spare oem wheels aren’t cheap. random post. Lol

 

https://www.partsgeek.com/gbproducts/AC/18535-06178393.html
Something like this

 

If you need an extra pair of hands you know how to reach me

 

This is a great site. I’d be broke in a week!!!

 

Their season is going so poorly that it's comical
(...he says, sad for Sainz)

 

Tires came in. Going with Mts on the outside. (It’s a tread design knife edge on one side mountain peaks on the other.). Install for Monday before an after pix then.

 

So Saturday I decided to do an overdue tune-up. First 5 plugs out no problem,, #6 kicked my ass! Wouldn't budge(60k since last change) soaked it in kroil and a bit more than a day later finally got it out. Not a feeling I ever want again.

All that waiting have me a chance to put on some old bling. Gave the throttle body the best cleaning ever, replaced the pcv, cleaned the maf sensor and some odds and ends.


It's an intake manifold spacer
Xtp??