New Switch Pros 9100 Switch Panel!

We have not set a light bar up like that yet so I wouldn't be able to give you an honest answer. I don't see why not. You may want to call Switch Pros direct to see if they could answer that question.

 

In the product description it says "Two External trigger inputs can each activate up to four outputs (Active Hi or Active Low)" I think this kind of got asked already but I'm not sure I fully understand. If I wanted to put control of two switches in my bed and control of the rest of the switches in the cab, do I need to have two of the switch pro control panels or could I use my own switch in the bed to save a few bucks? Maybe they have a second wire harness I could use and tap into?

 

Connect the Pink wire to an external trigger, it can be a high beam signal, reverse light signal, or a dome light signal to give a few examples. For example, if connected to the high beam signal, when turning on the high beams on the vehicle, up to 4 outputs of the switch panel will also turn on. The function can be turned on and off, with the switch panel to switch between off-road and street driving, by holding down the programming switch and pressing switch 7.

Switch Pros should be able to clarify any technical questions that are more in depth as to what you are trying to do.

 

I’m looking at getting the whole setup with the module mount under the hood. My question is, Since I have redline tuning hood struts installed Will those interfere with the bracket?

Thanks

 

Yes as it appears that redline uses the same holes that we do on the under the hood mount.

 

Well I ordered the mount prior to your reply. I’ve been looking at the mounting location and I may have to notch the plate but it doesn’t use the same mounting holes. It’s riveted to the fender itself.
Thank you for the reply, I’ll let ya know how it turns out so other customers can be informed.

 

Hey would you happen to know which wire to tap to the dome with the pink trigger wire?