New UT member

Hi guys,

New member here in Utah by way of Gerogia. I've been scouring the site for the past few months and finding a LOT of helpful info. Figured I should do my duty and join to try to contribute as well. I found a lot of useful stuff here when I rattle canned my wheels, re-soldered the resistor in my upper console when the temp/compass went out, and redid my front brakes.

I also did a lot of research here on 5100. I finally bit the bullet and ordered all 4 (ride height in the front, regular for the back) and am going to install them at 2.5 as well as a 2" AAL tomorrow with a buddy's help. I'll try to remember to take some pics so maybe it'll help someone attempting the same thing down the road.

After the suspension this weekend I'm going to add an ARB up front in a couple of weeks. I'll try to take step by step pics and do a write up. A friend helping me has done a lot of work on cruisers so I should be able to give a pretty detailed write up of the ARB install.

Thanks again for everyone's help in the past! I probably wouldn't have been able to do any of the above without TW as a resource.

 

Always good to see more tacomas in UT.

 

Aloha to TW! Hawaii boy going to school in Ogden

I'll be a part of the UTAH gang for about a year more

 

Welcome from Alabama

 

Welcome!