Not sure if these wheels will fit with my setup

Hey guys, so right now my current tire/wheel setup is 285/70R17 on 17x9 rims with a -5 offset. Now I’m looking at a set of rims, 17x9 with a +1 offset. Will these new rims work with the same size tires without rubbing too much?

thanks

 

Odd question, any rubbing is too much

 

Rubbing the mudflaps a little at full lock is minor my current set up does that. Now the real odd part about this is your useless lack of help

 

Sorry man, I should have said I don't want any rubbing on either of my trucks. If rubbing is good for you & your stuff, I certainly won't care. Good luck.

 

If you have uca’s get an alignment with 3+ degrees of caster. Should solve your issue. If your planning on wheeling a lot you gonna need to trim some.

 

What is your current lift setup?

 

I’m running a 3”levelling kit

 

There's no difference as far as rubbing between your current setup and the new wheels. You are comparing a current backspacing of 4.8" versus 5.0".