1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

not sure if this is common knowledge

Discussion in 'Audio & Video' started by 808trdsport, Dec 30, 2008.

  1. Dec 30, 2008 at 9:35 AM
    #1
    808trdsport

    808trdsport [OP] Well-Known Member

    Joined:
    Apr 10, 2008
    Member:
    #5882
    Messages:
    242
    Gender:
    Male
    Honolulu
    Vehicle:
    08 Tacoma TRD Sport Prerunner
    6000k HIDS, double tint in the back and tint front side windows, CGS cat back exhaust, AFE Pro Dry filter
    I heard from my Auto sound tech guy this information:

    If you are going to remove the stock head unit from your taco, make sure you do not turn the volume all the way down before you remove it. Keep the volume at half way.

    The reason is that the stock head unit has a built in mute if the volume is turn all the way down. And if you remove the head unit with it in the mute mode, you will be pulling out hairs trying to figure out why you don't get any sound through your new head unit. I'm not sure if this pertains to only the JBL system or not, but better to be safe than sorry.
     
  2. Dec 30, 2008 at 9:47 AM
    #2
    808trdsport

    808trdsport [OP] Well-Known Member

    Joined:
    Apr 10, 2008
    Member:
    #5882
    Messages:
    242
    Gender:
    Male
    Honolulu
    Vehicle:
    08 Tacoma TRD Sport Prerunner
    6000k HIDS, double tint in the back and tint front side windows, CGS cat back exhaust, AFE Pro Dry filter
    i also noticed that there is a little yellow paper notice of this inside my scosche wiring harness
     
To Top