oem fog lights in a sr5 double 4.0l auto 4x4

Bought a 2015 sr5 double cab auto 4x4 2 months and after some digging around and research i found the truck is factory wired and setup (almost) for installing oem fog lamps heres what i did

1. found a used set off of craigslist (got a used bumper and the lights for $80)
2. went to my toyota deal and ordered a oem switch and relay (for $65)
3. re and re the fog lights with the factory blanks.
4. the pig tails are taped off on the inner fender untie and plug in
5. remove the factory blank in the dash (the pig is plugged into the blank)
6. in the smaller electrical box in the engine compartment plug in the relay
7. Enjoy

 

Ya when I put in my light switches I noticed the two blanks were pre wired for heated seats like in the limited taco.. There for lights now..

 

I'm doing the exact same thing in my 2015 SR5 - bought lights and a relay yesterday. And now just need a switch. What part number was your switch?
I was going to use the part number for the 2012-2014 Tacoma, 84160-04020. Just wanted to confirm before I bought anything. Nice job btw

 

I did this in my 09

 

there are different options in the same year the toyotoa dealer can look it up via vin number