1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

"Off-Road" Magazine Tacoma Question

Discussion in 'Suspension' started by Pat, Oct 2, 2008.

  1. Oct 2, 2008 at 6:16 PM
    #1
    Pat

    Pat [OP] Well-Known Member

    Joined:
    Jun 16, 2008
    Member:
    #7344
    Messages:
    241
    Gender:
    Male
    San Diego
    Vehicle:
    05 PreRunner Access Cab
    King Coilvers, 285 BFG A/T's, Moto Metal 951b's 17"
    If any of you picked up the latest addition of the "Off-Road" Magazine there is a 05 Tacoma I think in there. I Just got it today but I was a bit confused when I read it. The article says he rear suspension is stock but it seems level with the front which has a set of Sway-A-Ways. Now I thought that the SAW's would just be cranked all the way down to 0' but it seems like the truck is lifted about 2". The truck does have Glassworks fenders and bedsides and 315/70R/17 BFG AT's but I don't think that just that will give the illusion that its lifted.

    I know this is a dumb question but its been bugging. Anyone know? Im guessing there is a logical explanation that I just over looked.
     
  2. Oct 2, 2008 at 6:21 PM
    #2
    Khaos

    Khaos Big Member

    Joined:
    Feb 4, 2008
    Member:
    #4570
    Messages:
    6,495
    Gender:
    Male
    First Name:
    Bryant
    Tallahassee FL
    Vehicle:
    2005 Prerunner TRD Off Road
    265/75/16 BFG A/T, 18" Magnaflow, K&N Intake Filter, Ultra-Gauge, Kobalt Toolbox, Metal Tail Light Guards, Cobra 19 and 4ft fiberglass antenna, Plasti dipped Badges/lower valance/rear bumper/grill/bullbar/ac controls, black DIN kit, JVC KD-X40, Wet Suit Seat Covers
    These trucks come stock with nearly 2" of rake (mine had over 2" of rake until I broke in the TSB leafs).

    So the front could be lifted 2", and the rear stock.
     
  3. Oct 2, 2008 at 7:14 PM
    #3
    Pat

    Pat [OP] Well-Known Member

    Joined:
    Jun 16, 2008
    Member:
    #7344
    Messages:
    241
    Gender:
    Male
    San Diego
    Vehicle:
    05 PreRunner Access Cab
    King Coilvers, 285 BFG A/T's, Moto Metal 951b's 17"
    That seems about right since the rear is stock about 2" or so higher then the front.
     
To Top