Off-roading With A Fiber Glass Camper Shell..

I have a Snugtop camper shell that's been reinforced to handle more weight by the manufacturer. I'm assuming it's been beefed up so that it has more structural rigidity as well. I've added bed stiffeners for good measure to prevent the bed of the truck from twisting, and potentially causing damage to the shell. Does anyone have any experience with fiberglass shells cracking while off-roading on rocky terrain?

Thanks in advance for any input!

 

mines cracked from the rear but i repaired it put more cushion, always tighten it before and after

 

Make sure the outer lip doesn’t rub the paint!

 

When I was shopping for a shell, I was told by one dealer (A.R.E.) that they didn't recommend certain models if the truck was going to be used for heavy off-roading. I believe it was models with the frameless rear glass.

With bed stiffeners and a reinforced shell, I suspect you'll be O.K.

 

I had a cheap canopy on my previous truck and ive spent many hours on rough roads, not rock crawling or anything. Never had issues considering the shell already had a small pre existing crack.

 

Perfect! Air down and go!

 

Would bed stiffeners and using a few extra mount points help?