Official 5-Lug Picture Thread

CLEAN AS F**K!!!!

Did you have a color matched bumper stock or what? And what headlights are those.....

One of the best trucks I've seen in a while! Including mine!

 

Holy crap I haven't been on in a while. How's everyone doing?

 

Thank you! Yeah my bumper is color matched from the factory. It just didn't have fogs. The headlights are Spyder projector with CCFL halos and LED DRLs.

 

You know...lugging around

 

Two pallets of insulation finally putting her to work >___< the funny part was my dad brought his chevy 1500 and we couldn't fit the pallet because of his cap on the back




Then brought the leftovers plus the machine back

 

Was wondering if anyone's tried a 15x8 wheel with backspacing of 2 or 3 inches and if so do they fit?

 

It's all about clearing the calipers if I recall correctly we need like a back spacing of 4.5" so if you tried a back spacing of 2 or 3 you'd need a decent sized spacer which could be Hella sketchy.


https://www.tacomaworld.com/threads/wheel-backspacing-and-offset-info.102992/

 

But having backspacing of 2 or 3 would put the center of the wheel closer to the inside pushing the rest of the wheel out so that it sticks out of the fender more
I think the problem is the flange on the bolt pattern of most wheels isn't thick enough so the caliper will make contact with the "spokes" of the wheel because it protrudes outward past the mating surfaces
Correct anything I am wrong about

 

That's one place to mount a CB. still don't know where to mount one if I end up getting it

 

I love it because when I don't want to use it.... I unhook it and throw it behind the seats

 

Where'd you mount the big ass antenna?

 

look on page 113 its the red 4ft firstik behind the cab

 

New rubber!
31" Goodyear Wrangler Trailmark

 

Feeeshhhhingggg

 

I'm actually in the process of painting my frame on my 06 2.7 access cab. Will post pics of all my mods, and my set up hopefully sometime tomorrow once it's all back together.

 

Here's some pictures for now will post more recently done things tomorrow

 

Clean looking truck, hlosalo. Still waiting for you to list the mods on it

 

Finally finished my skid plate
I used to have the bolts facing down but now I welded a nut and washer so it's a true bolt on I also tucked the front under the bumper

Before


Process


All done

 

I'm digging the low lights they'd be so useful down here in Florida when it's raining really bad.

 

Is that acrylic or starboard. Skidplate.