1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Ome lift abs/brake line plate issue

Discussion in '3rd Gen. Tacomas (2016-2023)' started by Usdmmark, Nov 5, 2018.

  1. Nov 5, 2018 at 1:24 PM
    #1
    Usdmmark

    Usdmmark [OP] Well-Known Member

    Joined:
    Mar 31, 2016
    Member:
    #182942
    Messages:
    232
    Gender:
    Male
    Newport Richey, Fl
    Vehicle:
    2019 Cement Sport 6MT
    i searched and have not found the answer so was hoping someone else has experienced this.

    2018 off-road lifted with 5100s and 885 coils. Got everything in ok but the plate that has the abs wire and hard brake line from the caliper attached is not lined up where it previously mounted on the spindle. I’m off maybe an inch or so.

    Do I just bend the brake line to correct it? Worried about kinking.

    Everything else went smooth minus this issue and I emailed Marie at @HeadStrong Off-Road but haven’t heard back.

    Thanks for any input.
     

Products Discussed in

To Top