Onboard Pressurized Water System for the 2005-Current Toyota Tacoma OBW

I'm more looking to be able to keep it all in the cubby. So the hose can stay connected and everything. Just pop the cover grab the hose and go. Just want to make sure everything can be squeezed in.

 

It's possible looking at adding on 90degree quick connects then the attached lines have room to swivel. Once I get that figured out I'll put in my order.

 

You can definitely install 100% of the setup inside the cubby. You'll need to shorten the plumbing a little but but thats just an easy slice with a knife or blade. If you REALLY wanted to, you could even eliminate the quick disconnects all together and just hardwire it all. That would take some slight modification to the hardware being used, but a few bucks at your local hardware store for the right brass fittings will eliminate the quick connects and you can hardwire it. Although I'd still keep them since they would still be nice to have incase you ever want to switch out to a longer hose. You can see the pics in the OP this kit is extremely universal and you are only limited by the amount of plumbing included, but you can customize the install to any variation you choose. The cubby should fit everything just fine though.

 

That rotational swivel shown in the OP example photos is available at Lowes for about $5-7 iirc. It is not included with the kit, but if you wanted them, I can add the cost to your invoice and preinstall them into your kit before shipment. You can do 1 or both connections. Let me know what I can do to help

 

Before I set my order in can that 360 degree swivel attach to the filter? Just read the last post. What would be the total price with shipping?

 

Kit is $200 and shipping is $10.
If you want to add the swivels they are $7 each and ill install them on the lines with the correct fittings before your kit ships. You can get 2 although in my experience there really is no need to have one on the intake line with the filter. But again if you want 2 swivels i can make it happen.

 

List updated. 7 kits left before they are gone

 

Down to 6 remaining

 

Great product, fit everything into the cubby, will post pics when the sun is out for better visibility.

 

That was fast! Ordered Thursday, shipped to the big island and installed by Monday night. Impressive! Glad you like it

 

Down to 5 left.

Anyone still interested in a portable unit? Thinking a out experimenting with a portable kit

 

Images as promised. Also just added a 3/4in. Conduit strap to keep the switch from turning on from things moving when off roading.

 

looks good! nice work

 

1 more sold, 1 pending sale, and 1 possible. That means 2 kits left. PM me if you want to get in before they are gone. Depending on demand, i may consider running another batch but only if i have a commited list before production. Ill address that once these sell out

 

I'm 100% interested in a portable unit.

 

I think a lot of people are. Only issue is that i now have only 2 kits left and likely wont be building any more after this. Unless there is enough interest that i can setup at least 15-20 units minimum as a group buy and have a presale list then it just wont work. But im still throwing around the idea.

I am currently working on a pump built into a .556 ammo can. Its a one off kit using a spare pump i had but ill post pics and see what everyone thinks. Should be complete this weekend

 

Hmmmm I'm considering doing all mine in to a portable unit now (decided to just stick with the LT build on the truck). Was thinking a plano box of some sort with just the connections on the outside for Inlet/outlet and then something like 10-15 feet of cable. Wonder if the plug in the bed would work or not, will have to look and see what the draw is on the pump I got. Gotta find theperfect size box to fit pump+accumulator. More to come later

 

Well if that's the case, sign me up for one of those last two kits!

 

Officially down to my last kit. Who wants it?