1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

One last time LIFT KIT HELP!

Discussion in 'Suspension' started by LilRedYota, Mar 15, 2011.

  1. Mar 15, 2011 at 6:33 PM
    #1
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    Ok so im sure those of you that are online alot have noticed i keep asking stupid questions about lift kits....i know some stuff but im gettin closer with all the guys helpin me out on here. THANKS by the way. so here we go....hopefully for the last time:

    I think ive come up with all i need:

    1. http://downsouthmotorsports.com/i-1...acoma-pre-runner-4wd-pre-load-adjustable.html

    2. http://www.toyteclifts.com/index.ph...tegory_id=122&option=com_virtuemart&Itemid=72

    Again i have a DC 01 taco....thaaanks!:D:D:D:D
     
  2. Mar 15, 2011 at 7:03 PM
    #2
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,260
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!

    looks good to me, and i guess your going to use the factory coils up front? if i were you id go ahead and drop the lil extra dough on the eibachs while i was at toytec and get a better discount code and dont forget to make an account on DSM to get the discount there to.
     
  3. Mar 15, 2011 at 7:05 PM
    #3
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    thanks man! whats the part number for a good set of eibachs?
     
  4. Mar 15, 2011 at 7:37 PM
    #4
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,260
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!
    dont have a part number but heres the link to them. and that way you can set the billies at 0" and still achieve 3" of lift and if not since you have the winch you can go up to 1.5" notch on the billie, i know when i get my plate bumper i will be at the 1.5 to compensate for the weight.
     
  5. Mar 15, 2011 at 7:40 PM
    #5
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    nice i found them! and dang 150 for them!
     
  6. Mar 15, 2011 at 7:42 PM
    #6
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,260
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!
    yea i thnk i paid right at 175 including shipping for the coils and 175 for the Billies, so 325 all in all, then im tryin to sell my space lift to save up for new leafs in the rear.
     
  7. Mar 15, 2011 at 7:43 PM
    #7
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    true true.
     
  8. Mar 15, 2011 at 7:44 PM
    #8
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    wait 175 for the billies? you just did rear billies? im doing all arounds
     
  9. Mar 15, 2011 at 7:52 PM
    #9
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,260
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!
    i just did fronts, yes the whole set is around 300 if im not mistaking from DSM, but i already had extended rear shocks that came with my spacer lift so i am using those for a hwile before i upgrade to the rear Billies as well
     
  10. Mar 15, 2011 at 7:55 PM
    #10
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    oh true so if i bought the all around billies would i need a new set of AAls? and front coils?
     
  11. Mar 15, 2011 at 8:01 PM
    #11
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,260
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!
    No you could re-use your factory coils but you would still need an AAL. The eibach coils are just a 3" lift coil so you dont have to raise the setting on the Billies for the stock ones, it will ride rough with the stock coils raised up on the 1.5 or 2.5 setting, so with the eibachs you can leave it at 0 and get the nice ride, mine ride awesome, if you want to check them out sometime just pm and you can look it over.
     
  12. Mar 15, 2011 at 8:03 PM
    #12
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    aaahhh ok cool cool. thanks. yea so im just gonna buy the billies all around and the rear aals....then save the mooola for the coils.
     
  13. Mar 15, 2011 at 8:04 PM
    #13
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,260
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!
    Sweet deal, you will like it!
     
  14. Mar 15, 2011 at 8:11 PM
    #14
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    sure hope so or that will be 400 bucks down the draaaain!
     
  15. Mar 15, 2011 at 8:12 PM
    #15
    lmusurfer

    lmusurfer Member

    Joined:
    Mar 14, 2011
    Member:
    #53041
    Messages:
    17
    Gender:
    Male
    First Name:
    Max
    Los Angeles
    Vehicle:
    07 PRERUNNER TRD///
    Smoked Taillights, 18% tinted windows, Sprayed Back Stock Wheels, JDM BLK Headlights, DDM HID Kit Slim Ballast 55W 5000k, Flowmaster Exhaust, (soon to be) SONY Deck in Scosche Double-DIN Installation Kit, more to come +++
    Probably have the same/similar question everyone else has....I understand every lift is different but I think I know what I want and I think I understand what I want to achieve with my truck. Here it goes....

    I have a 2007 Toy Tacoma TRD 4x2 and I want to lift it 3". I live in LA and am not going out to rage in the mountains but want the lift still with quality (no spacers....right?, I want smooth and nothing detrimental to my suspension). From what I understand, a 3" lift means (I think, PLEASE correct me if Im wrong) is a leveling in the front by about 1.75" (???). The little research I've done on this forum, most recommend to get a toytech Billstein 5100s all around (heard they do great things to the ride in the rear....thats what she said) and aal in rear. Right? Wrong? I just want to know what to order from toytech to achieve this 3" lift. Thanks for your patience TW.
     
  16. Mar 15, 2011 at 8:15 PM
    #16
    LilRedYota

    LilRedYota [OP] Well-Known Member

    Joined:
    Feb 15, 2011
    Member:
    #51231
    Messages:
    431
    Gender:
    Female
    First Name:
    Candice
    South Carolina
    Vehicle:
    2010 TRD Offroad DC 4x4
    UWS toolbox-sprayed black with linex More to come!!!
    yea thats right....5100s all around and get the aals in the rear....smooth ride and its all quality...that should do it all up for you!
     
  17. Mar 15, 2011 at 8:21 PM
    #17
    lmusurfer

    lmusurfer Member

    Joined:
    Mar 14, 2011
    Member:
    #53041
    Messages:
    17
    Gender:
    Male
    First Name:
    Max
    Los Angeles
    Vehicle:
    07 PRERUNNER TRD///
    Smoked Taillights, 18% tinted windows, Sprayed Back Stock Wheels, JDM BLK Headlights, DDM HID Kit Slim Ballast 55W 5000k, Flowmaster Exhaust, (soon to be) SONY Deck in Scosche Double-DIN Installation Kit, more to come +++
    f*cking love the quick response! Thanks so much! Still waiting on my boy to come back from the body shop after getting all the knicks, bumps and scratches smoothed out (with addition of JDM BLK Headlights with DDM HID Slim Kit 55w 5000ks and spaying skid plate black)....pics up ASAP!
     
  18. Mar 15, 2011 at 8:22 PM
    #18
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,260
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!
    x2 just note that the 2nd gens require a higher setting to achieve 3" than the 1st gens. ex;

    1st gen set-up 5100's w/ eibachs set at 0 = 3"

    And 2nd Gens with same set-up have to set at .85 to achieve 3"

    Im pretty sure but dont hold me to it:D
     
To Top