over head console switches group buy

Can't they be painted to match stock color?

 

They can it just takes more finish work to blend everything for something that can scratch easy after words. But painting would be the closest you would get to stock color especially with the tan color. I don't have anything that matches In my book but am waiting to see another one. I do have paint that matches pretty close to the tan though and i am waiting on @ramonortiz55s runner console to see.

 

Has he already sent it to you?? Cause I know He's out of town right now. If you need, I can send you mine...if that would help. Not trying to over step by bounds...just trying to help! Let me know...thanks

 

I did not know he was out of town and has yet to send his in. If you want to send I yours now your more then welcome too

 

More switch panels ordered today!

 

Car you retrofit my sunglasses holder?

 

I can, but it might be to far back to be comfortable. Try taking some sticky notes and placing and bending down to mimic the switch panel and see what you think of it. Again I have no problem setting it there but it's closer to you when it's done then you think.

 

I sent in my console! Very excited to get this done! I never use my sunglasses holder anyway, except occasionally to put my chap stick in there. This is going to be totally awesome!! I'll make sure to post plenty of picture once I get this back!!

 

Thank you everyone for your interest in these and I hope you're as pleased with them as I am.[/QUOTE]

 

[/QUOTE]
Shhhuuuttttuuuppp you couldn't even quote me right

 

Okay so I've decided to get one of these now. I think what I want to do if its possible is just have mine made like everyone else so it can fit a switch panel, however I don't want a switch panel. What I am going to do is fabricate my own little panel to fit my Scangauge in, within the fiberglass cutout, and if I ever want to swap it out to have switches there, I can down the road. If that makes sense.

My main reasoning being I haven't decided if a special panel JUST for the sole use of a Scangauge is a waste of real-estate or not lol.

So it is $50 deposit, I send in my overhead console, then the other $130? (if what you said about knocking off ~$20 since I don't want a panel still stands)

 

Looks good buddy.

 

Correct and also correct on the price.

 

Here is some pictures of the wiring. The one with the plug would be normal wiring if you only had on off for all of them. The other two are for the heated seats switches and yes they will fit down the pillar. I will post more on the install.

Jake,

 

Looks good JAKE!

 

Loving the way that looks Jake. Because I suck at electrical work, we would have to run the lights or whatever to the blue sea block still correct or would that run somewhere else?

 

Lights in the switch or what you want to power? The switch from there will run down the pillar to the blue seas fuse block then the Hella relay. The fuse block has nothing to to with the switches except for one for the lights in the switches. The fuse block if to be for your Accessorys that will be controlled off the switche. Does that make Any sense? So it will have two parts. One will be the switches that will have a ground and a power for the LEDS In the switches (shared between all six) and then a single wire from each switch to be put to a relay. The relay has basically two directions passing through it one is the single wire from the switch to one side of the relay and going though to a ground. That is what controlls the other direction. Direction two is what powers your accessory. So it will be power from your battery/blue see fuse block/ one side of relay and out the other side/ accessory/ then ground.

Hope that makes sense. If some one does not under stand my rambling let me know and I'll try and see if I can make more sense.

Jake,

 

Subd

 

Subbed for later

 

Please add me to the list for option 3 I need to find out what switches I want to run but want to figure out when the cut off for group buy is so I can plan finances around the holidays Christmas is killing me but I need this panel asap with the fuse block. Another question besides dead line is can the fuse block be used for more than just the 6 switches? Can I hook more stuff up to this fuse block or is it a strict 6 switch fuse block?