Passenger Side Window Problems Third gen Tacoma

Hey everyone. So I was doing some sound deadening on my doors, all went well and I achieved the desired result. Now I went to roll down my passenger window from the driver controls, but it’s not working. Both rear windows worked.

So I tried the switch on the passenger side and it worked, however the automatic function isn’t working aka the button needs to be held the hold time.

So passenger side front not working from driver switch at all, and only working on passenger side with no automatic feature. I didn’t see any blown fuses and the connections are good. I need some help here if anyone can offer any.

 

Someone else in another thread had the same problem after installing the Meso puddles. The drivers door switch needed to be reset. I will see if i can find the link.

 

Try the above and hope that fixes your problem.

 

It worked! Thanks your a lifesaver I could only find answers for second and first gens when I searched. Thanks for that video!

 

Glad it helped. Thats what TW is all about, people helping people.

All that really means though is I am surfing this site too darn much!

 

Just tried this tonight didn’t work for my 2017 TRD off-road

 

Try undoing your battery, checking all the connections and trying again. This should work for you. What is your exact problem did you have the same as mine?

My steps were as follows:
1. Driver side window all the way down for ~4 sec and one sec after it’s down all the way.
2. Passenger front on the passenger front panel for same amounts of time.
3. Passenger rear on passenger rear panel for the same time
4. Driver rear on driver rear panel for the same amount of time.

Hopefully this helps. Curious to hear what your problem is

 

@lpfe42 also where are you a FF?

 

My problem started after I put in the meso puddle lights. I was a few years ago Worked on the los Padres national forest

 

ahh nice. Is it the same window that I was having problems with?

 

It’s actually the master control on the driver side And rearview mirrors are not working either

 

Same for me. I accidentally fixed it somehow.

 

None of the master control buttons are working? Have you tried disconnecting the meso puddles? And I’m sure you have but all fuses?

 

Auto up/down and rearview not working

 

Your rearview dimmer ?

 

The outside left and right rear view mirrors also. Unfortunately I’m going to drop it off at the shop today after work going on a 3 Week Rd. trip to the East Coast next Saturday

 

Yesterday after work I disconnected everything for the Mesa puddle lights After work I’ll try reprogramming the switch