1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Picture request.....3'' lift and 31'' Tires.

Discussion in '1st Gen. Tacomas (1995-2004)' started by TacoMX, Dec 23, 2011.

  1. Dec 23, 2011 at 12:13 AM
    #1
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
    I am planning on running a 3'' suspension lift, (eibachs, billys, etc...) And I am going back and forth between 31x10.5 and 32X11.5.

    I can get a good deal on some 31's and being on 4.10 gears, I would love to enjoy stock power and MPG's since I am on 33X12.5 now.

    I have seen a few 3'' lift tacos on 31's...but I need a few more to help me make up my mind.


    I will eventually go 33's again when i have the money to re-gear...but that is later down the road.
     
  2. Dec 23, 2011 at 12:42 AM
    #2
    Konaborne

    Konaborne Pineapples on pizza Hawaiian does not it make.

    Joined:
    Nov 21, 2010
    Member:
    #46536
    Messages:
    31,748
    Gender:
    Male
    First Name:
    Cody
    Kealakekua, Hawaii
    Vehicle:
    Lifted 00 TRD Off-Road
    fox extended travel remote resivoir coilovers, 14" eibach 600lb coils, All Pro tubular chromoly 1" uniball upper control arms, All Pro expedition leaf packs, 10" bilstein 5150 piggyback reservoir shocks 265/75r16 Goodyear wrangler MT/R kevlars wrapped around 16" Helo 791 gloss black, Mini H1 retrofits with 6000k bulbs, 18" magnaflow w/custom exhaust reroute various decals, Sockmonkey retro hood stripes
    Mine are 31.5, check my build thread
     
  3. Dec 23, 2011 at 12:56 AM
    #3
    jblaze805

    jblaze805 Well-Known Member

    Joined:
    Nov 20, 2009
    Member:
    #26253
    Messages:
    1,124
    Gender:
    Male
    Ventura/Fresno, CA
    Vehicle:
    04 trd pre-runner
    2.5" king coilovers, caburg uca, magnaflow exhaust, aem intake
  4. Dec 23, 2011 at 12:57 AM
    #4
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
    thanks.

    I always thought your tires were larger than 31's.. (like a 32 or 33).

    Looks great :cool:
     
  5. Dec 23, 2011 at 12:59 AM
    #5
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
    thanks!
     
  6. Dec 23, 2011 at 1:13 AM
    #6
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
    haha, right?

    I know of blackdawg's truck. It look(ed) great with 31's. Even better with 33's.

    The main reason for this thread is because I have a ripped valve stem that I need fixed, and I have my 31X10.5 spare on my truck. And with the other 3 tires being 33X12.5...the 31 looks like utter shit...lol...
     
  7. Dec 23, 2011 at 1:16 AM
    #7
    jblaze805

    jblaze805 Well-Known Member

    Joined:
    Nov 20, 2009
    Member:
    #26253
    Messages:
    1,124
    Gender:
    Male
    Ventura/Fresno, CA
    Vehicle:
    04 trd pre-runner
    2.5" king coilovers, caburg uca, magnaflow exhaust, aem intake
  8. Dec 23, 2011 at 1:24 AM
    #8
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
    oh yeah, I just have the spare on there till I can run it down to get the stem replaced. I have lifetime road hazard on the tires.

    Just having the 31'' spare just made it look TINY compared to the 33's.

    I will get pics when the sun comes up..haha
     
  9. Dec 23, 2011 at 1:29 AM
    #9
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
  10. Dec 23, 2011 at 4:11 AM
    #10
    jblaze805

    jblaze805 Well-Known Member

    Joined:
    Nov 20, 2009
    Member:
    #26253
    Messages:
    1,124
    Gender:
    Male
    Ventura/Fresno, CA
    Vehicle:
    04 trd pre-runner
    2.5" king coilovers, caburg uca, magnaflow exhaust, aem intake
    There the coilovers set to 1 inch of lift plus my 3 inch spindle which gives me a total of 4 but yeah i def need to get bigger tires maybe some 33s i just dont want it to affect the mpgs though well see what my next tire size will have to be im due for a new set soon
     
  11. Dec 23, 2011 at 10:21 AM
    #11
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,087
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    Id get 32s man.

    My 31s looked fine till i got the new bumper..then it was just bad.

    32x11.5s would looked pretty good tho, and i prolly never woulda got 33s if i had 32s.

    but yea, just go to my build and there are tons of pics with 3.5ish'' up front and 4.5ish'' out back on 31s. Looks fine with stock bumper with spacers. Without the spacers tho it was bad haha



    and ben that is a shit pic to show cause we have its strapped down so its not a full lift..sheesh.

    [​IMG]
    [​IMG]
    [​IMG]


    Just remember thats with 1.5'' spacers too.
     
  12. Dec 23, 2011 at 11:03 AM
    #12
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
    yeah...I know the 32's would look much better...but the cost is the limiting factor right now.

    And my rims have 3.5'' BS, so 31's would stick out on my truck like they did on yours w/ the spacers.
     
  13. Dec 23, 2011 at 12:54 PM
    #13
    Supra TT

    Supra TT Solid Axle FTMFW!!

    Joined:
    Jan 3, 2011
    Member:
    #48645
    Messages:
    5,977
    Gender:
    Male
    First Name:
    Eric
    Lafayette, Indiana
    Vehicle:
    2000 SAS D60 F/R
    SAS.. Need I say more.
    Does this help?

    [​IMG]
     
  14. Dec 23, 2011 at 2:29 PM
    #14
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,087
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    Ah i see. Well i hope you can afford the 32s..or buy my 31s :D lol
     
  15. Dec 23, 2011 at 4:56 PM
    #15
    YotaKid62

    YotaKid62 Dirty mall crawler

    Joined:
    Dec 7, 2011
    Member:
    #68355
    Messages:
    1,197
    Gender:
    Male
    First Name:
    Forrest
    North Dakota
    Vehicle:
    00 Tacoma TRD Sr5 5 speed
    Grey Wire Locker Mod, 3" coil spacers & custom leaf packs, 2" BL, Skyjacker rear nitro shocks, Monroe front gas shocks; 15" eclipse sub & 1400 watt visonik amp with Kenwood stereo, Billet Petals, Black Aries series Grille guard, ebay baja lights (unsure of brand)
    Still on the Factory rims and some All terrain 31's w/ a 3 inch lift, though I would like to upgrade to 32's or 33's[​IMG]

    [​IMG]
     
  16. Dec 23, 2011 at 4:58 PM
    #16
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,087
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    ^^HA looks just like my setup..set i had more rear lift. It looks good somedays..others not so much eh? lol
     
  17. Dec 23, 2011 at 4:59 PM
    #17
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
    Your KM2's are high on the list depending on shipping costs.
     
  18. Dec 23, 2011 at 5:02 PM
    #18
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,087
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    True..you are an Fing long ass ways away lol
     
  19. Dec 23, 2011 at 5:11 PM
    #19
    45acp

    45acp Paint me back in Wyoming again...

    Joined:
    Aug 9, 2009
    Member:
    #20861
    Messages:
    6,481
    Gender:
    Male
    First Name:
    Jonathan
    Boring, Wisconsin
    Vehicle:
    bone stock / unmolested 04 2.7L
    How much do you think it would cost to take them on the plane with me? I'm headed to FL on the 28th lol:D
     
  20. Dec 23, 2011 at 5:12 PM
    #20
    TacoMX

    TacoMX [OP] TW's Official anti body-lift pundit

    Joined:
    Aug 24, 2011
    Member:
    #62240
    Messages:
    4,834
    Gender:
    Male
    First Name:
    Jonathan
    Deltona, Florida
    haha, considering baggage fees...it would probably cheaper to fedex the bitches :D

    I wont have the money that quick anyways.
     
To Top