PLASTI DIP!?

Hi everyone. First post iv made..
I plasti dipped my front emblem yesterday..Took it off. Looks alright but BUBBLES!!?? Made several coats. Just heard such good things about this dip, but not impressed this time. Suggestions?

 

I did mine in January and still looks great. All I did was clean with q-tips and rubbing alcohol. Then sprayed 4 very light coats with 15-20 min. Dry time between coats.

 

It will get bubbles if you do the coats to thick and not enough dry time to make each coat just a little tacky to touch.

 

I see, im sure i just did it too thick then. Thanks! Still looks great just some bubbles if you get close to it!

 

I'm in the process of doing that too. I think we picked a bad time for it cause some of the parts i painted got a little bubbly but i think it's just because i chose to do it at the coldest time of the year like a dumb @$$
file:///var/folders/QL/QLNls-gEEymtNK5gXUDrCb3qQS+/-Tmp-/com.apple.PhotoBooth-T0x100117980.tmp.9jLF4w/Photo%20on%202012-12-25%20at%2010.32.jpg

 

I'm in the process of doing that too. I think we picked a bad time for it cause some of the parts i painted got a little bubbly but i think it's just because i chose to do it at the coldest time of the year like a dumb @$$
file:///var/folders/QL/QLNls-gEEymtNK5gXUDrCb3qQS+/-Tmp-/com.apple.PhotoBooth-T0x100117980.tmp.9jLF4w/Photo%20on%202012-12-25%20at%2010.32.jpg

 

I'm interested in doing mine so, simple question, what kind of enamel are you using? With a follow up question- what do you use to remove emblems? Thanks.

 

You might like to take a look at this:

http://www.tacomaworld.com/forum/detailing/124474-plasti-dip-mega-thread.html

 

Like any adhesive product you need to prep really well. Clean, scuff, clean, light coats and let them flash in between or you will get the bubbles.