Poll: 3rd Gen wheels on 1st Gen Tacoma?

1.25” Spidertrax

 

Would think newer verses a more worn suspension primarily, or not running spacers at all. Rubbed up front before adding spacers on frame just slightly at full crank.

Have the 2020 Tacoma 17" sport wheels with 265/70/17 wildpeaks. About a 32" tire profile. I love the tires, the wheels are okay.. However price was too good to pass up for both NEW rubber and metal so went with it. Puts me about same height as a stock PRO.

 

just threw these 2021 tacoma sports on, im digging it so far

 

So I’ve been running 3rd gen wheels on my 2001 for a while. Just put on some spydertrax spacers due to rubbing. I swapped the OEM lug nuts for the mag style but have noticed that the wheel shifts on the lugs. Do I need to go back to the 2001 OEM lug nuts? Or get some third gen lug nuts?

 

I personally think the 3rd gen wheel options look too modern for first gens

 

See, the people in this thread got it all wrong.

3rd Gen wheels on a 1st Gen?

Hell yes

3rd Gen 4Runner that is -

 

I recently bought the same wheels for my 03 double cab 4x4. they fit great in the rear, but the front wheel studs were too short even though everything appears to be OEM and was properly seated against the rotor. fingertight i could turn the lugs 9 times in the rear, but the front only 3.5. do you have any possibly guesses what might be the issue, or did you have this problem?

 

Exactly, I had to add spacers because it looked so silly...

 

Or these.....31x10.5 15" . More tire less wheel looks better on the smaller trucks, plus I like seeing the header and suspension through the wheel well