Post SAS parts SOLD

PM me if you have questions or want to get a multiple part discount.

Uniball UCA's have been sold $300

Coilovers have been sold $500

SOLD Lower control arm adjustment cam bolts and nuts. 2 bolts and 3 nuts. All nuts in good shape one has slight surface rust, one had just a little surface rust.
$10 you ship or local pick up. [Pic removed]


SOLD
Spare tire crank (will remove from crossmember and clean up before shipping) works great and will even include factory cranking tools if wanted $20 you ship, or local pick up. I cleaned it up a little bit, could use some paint. Includes 4 mounting bolts




SOLD
Front differential regeared to 4.56 with Nitro gears and full Yukon rebuild kit had a little over a year of use. Rear gears included, same use and also Nitro. Both were broken in properly and had 3 fluid changes $450 you ship.



SOLD
Manual hub conversion. Everything you need. Spindles, manual hubs, 4 CV's (2 Napa CV's with a little over a year of use, 2 other ones seem good but I replaced them with the Napa ones for PM) $450 you ship.


SOLD
Calipers
Both work good and are under 2 years old I believe but should be documented in my build. (Can get better pics if necessary)
$10 each you ship


SOLD
OME Shocks
Has less than 18 months of use, a few rock chips and should be good to go. Model 60062 is visible in second pic. Free to @N8ivFlav (he bought the coilovers and UCA's) or $20 + you ship.


SOLD Spare Tire $10 Looks like it has never been used, wear marks from underbed mount not bad at all.



SOLD
OME Grease-able stock length shackles. $free you ship or local pick up

 

Are the spindles abs? Might be interested in the CVs

 

No abs and no add in this truck.

 

@alee891 Idk if you have any interest in going to manual hubs and eliminating you add,if ya are here ya go

 

I might be interested in the gears

 

I tried to price everything low enough that even with shipping to you guys down south it would be reasonable.

 

Nvm bro....gonna go 4.88

 

Might as well go 5.29 then... Jk.

 

I believe I replied to all PM's. Will try to get better quotes on shipping at my work warehouse for the manual hubs.

 

Updated OP, LCA alignment nuts and bolts are gone.

 

Updated OP. Added some more stuff and took some more pics. Priced to go!

 

Hello SnowroxKT, interested in your manual hubs/spindles. I'm in So Cal.

 

Sounds good. Two others are interested, shipping without CV's is going to be about $36 for media mail and $123 for ground. With 2 CV's I would have to ship 2 boxes. It exceeds weight limits for USPS.

 

I guess I misspoke, would also need/want the CV's. Trying to put my truck like it should have been originally.

 

Guys if you are looking for shipping quotes please PM me.

Prices are obo and shackles are free, just pay shipping. First to claim them will get them. I won't be able to ship anything out this week, if it's something simple my wife will be able to though.

 

PM'd

 

Drive shaft pictures

 

i'll take the shackles... PM inbound!

 

Just got back from running a scout camp. Shocks gone. Trying to catch up to PMs.

 

I think all PM's are replied to... Shackles are pending shipping payment. @Looiz has the first shot (I'll give him a day or two), then I'll go down the list.