1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

power for Alpine crossover?

Discussion in '2nd Gen. Tacomas (2005-2015)' started by clia25, Jan 19, 2011.

  1. Jan 19, 2011 at 6:34 AM

    clia25 [OP] Active Member

    Oct 26, 2008
    After much searching on this forum, I'd decided to change out the front stock speakers to see if there is any umprovement (possible new HU, amp and sub if there is no improvement). I chosed Alpine SPR-17S component speakers. My HU is a Non-JBL w 6CD changer.

    I cant seem to find any thread on this so my question is where do i tap in to power my crossover? Do I pull wire fom the head unit or can I tap from some wires in the door panel? Can I use the wire harness that went into the stock speakers? Hope my questions are not stupid but I just want to make sure I do it right.

    Much thanks in advance for any help.

Products Discussed in

To Top