Powered sub install

I will be installing an Infinity Basslink powered sub, with the rest of the system bone stock. I am wondering where is the best spot to pick up a speaker level signal, both right and left, and if anyone knows the wire colors. Any help is appreciated.

 

what kind of cab ya got? Regular cab, then pick them up from behind the radio. If you have an access or double cab, then use the wires going to the rear doors. Can't help you on coloring, but I'm sure someone here will know.

 

access cab. No rear door speakers, just ceiling mounted ones.

 

I found this stereo wiring color code for a 2005 tacoma and they should be the same because i think it was the exact same wire code for my 02, but i would try a google search to double check. I dont think they have a wiring diagram anywhere online since you have an 09. My suggestion is just go to your local autoparts store and buy a service manual for an 09 taco because they might have the daigrams and stuff in there. Good luck

Radio 12v blue/yellow + radio harness
Radio Ground brown - radio harness
Radio Ignition gray + radio harness
Radio Illumination green + radio harness
LF Speaker +/- pink - purple +,- radio harness or amplifier
RF Speaker +/- lt. green - blue +,- radio harness or amplifier
LR Speaker +/- black - yellow +,- radio harness or amplifier
RR Speaker +/- red - white +,- radio harness or amplifier

 

i also found this on toyotanation.com im not taking credit for this but im just posting it just so its available.....

 

Thanks a lot!

 

thanks man just used it to hook up my line out converter