Pro Comp 7069

I just received these wheels in the mail today. It's a -12mm offset. I should've researched offsets before hand but for some reason i did not. what will the offset do? will i have to adjust or add anything? Thanks from the newbie!

 

Need to know the size diameter and width of the new as well as your stock to give you exact what it will look like. But in general that is less backspacing than stock means the wheels will be out slightly more. If your stock is 16x8 that has 5.5" backspace which equals +25mm, if the new wheels are 17x9 (most likely) then your new back spacing is 4.5" so pushed 1 inch more out

 

I have 16x8 with a 3.75 back spacing

 

the stock was 16x7

 

If stock was 16x7

you mentioned -12mm offset with the new wheels but you now say 16x8 3.75 in BS I'm confused. On a 16x8 -12offset is 4 " BS.

Just compare the chart for the old and new sizes, if BS goes up you are more tucked if it goes down you are more out. Offset refers to distance from center so rim width is in play to calculate.

 

you were correct-I double checked and it was indeed 4" backspace. will that and the -12mm effect much? thanks

u w

 

How did you make out with this rims?

 

I put 265/75/16 Dynapros on em last weekend, they come with hubcaps but I left them off(they wouldn't fit the front) all in all I really like the look of them-backspacing looks good no complaints-I did buy the lug nuts that are recommended for them, too. plus black lug nuts make it look even sharper!

 

Looks great, do you have any pictures from the side and rear view ? Do you have any lift? I see this rims and like them a lot. I wanted to know how much if any they would stick out past the body.

 

I don't have any pictures currently, but it sticks out no more than maybe even half an inch. I don't have a lift. the tires rub the flaps currently(I moved up from 245/75/16 Dunlops) but I will be putting Bilsteins on in a month to level it so the rub will be gone, no big deal. I will post pictures this weekend of how far they stick out, but it isn't much though or I would have already posted a picture of it if it was major! haha

 

Wow sounds great, I'm looking for alittle wider stance. I got bilsteins on now to level her out.

 

any pics of the level?

 

Thinking of buying these pro comp 7069 16x8 -12 offset 4im backspace for my 2008 sport. Do you have any problems with the wheel rubbing the caliper ?

 

Just picked up a set of five. As soon as the lug nuts come in I'm wrapping them with Cooper ST Maxx in a 285/75/16. I'll throw up some pics once they're mounted up on my MGM with 3" lift.

(Daytona for scale)

 

Solar, where did you get them?

 

I ordered them from 4 Wheel Parts. Super good deal. I paid a little over $80 each.

 

I've had my eye on these rims for about a year, can't decide on 17" or 16"... I don't have a lift and don't desire one either. I would like the look of the tire/wheel extended past the fenders however I'm concerned about rubbing.

 

I am looking t these for my 16. I think the 3rd Gens are wider? I wonder what these will look like on my truck.. The price is awesome!

 

Just a heads up... Test fitted one wheel without rubber on my 2nd gen. 16x8. Caliper clearance was about 1/16th to the wheel face. Too close for comfort in my opinion. 4 Wheel Parts was cool enough to do a straight across swap for 17x9's. I'm a little bummed, was looking forward to more rubber than tire, but that shit was crazy close.