1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Pulley replacement...winding noise increases when accelarating...Help!

Discussion in '2nd Gen. Tacomas (2005-2015)' started by BImike, Sep 28, 2010.

  1. Sep 28, 2010 at 11:50 AM
    #1
    BImike

    BImike [OP] Member

    Joined:
    Feb 14, 2010
    Member:
    #31352
    Messages:
    24
    Gender:
    Male
    2006, 4WD, quad cab, long bed, 4.0L

    Had a friend look at the truck yesterday, he says the pulley indicated below seems to be giving off the most noise and is probably the reason for the sound.

    Anyone else had this problem?


    1) Is there a diagram of the belt system indicating what pulley is what?

    2) If not, does anyone know the name of the smaller pulley located slightly below and to the right of the crank and slightly below and to the left of the A/C compressor?

    Thanks!
     
  2. Sep 28, 2010 at 5:52 PM
    #2
    Fortech

    Fortech Well-Known Member

    Joined:
    Mar 31, 2008
    Member:
    #5636
    Messages:
    878
    Gender:
    Male
    CANADA
    Vehicle:
    2005 Toyota Tacoma TRD OR
    Bilstein 5100's, rear TSB, Firestone bags
    There are three idler pulleys and a tensioner pulley down there. Two idlers up top, and idler on the bottom, and the tensioner near the crank pulley if memory serves - which it should since I worked with this last weekend replacing my engines crank seal.

    Simple fix. Had to replace 3 of mine this past summer after one seized and busted my drive belt.
     
To Top