Push button Transfer case and A340F out of 2001 5vzfe 4x4

Located in Melbourne, FL
Prefer local pickup
Both came out of my 01 Tacoma v6 5vzfe
Push button transfer case works without issues and was regularly maintained.


The A340F trans had the pink milkshake, I caught it right when it happened so there was no damage to the transmission. Afterwards I drove it about 15k miles before doing my manual swap, drove 100% normal without a single issue. Comes with Flex plate and Torque converter

$300 each or $500 for both

 

Any chance you could check on shipping
Business 92069 san marcos ca

 

Let me get that transfer case mount on the rear of the transmission.

 

Also interested in transmission mount

 

What mount are you referring to on the rear of the trans? Do you just mean the transmission mount? The transfer doesn’t have its own mount, it bolts to the trans.

 

Are you interested in the mount itself or the cross member? Because if you are wanting the mount then I would suggest just going to buy a new one, probably cheaper than dealing with paying for shipping for me to send my mount, even though it’s only a year old.

 

The 8 bolt holes that the transfer case mounts to remove those. If you remove the transfer case you will see 4 or 5 bolts that can be removed. That piece is what they call a transfer case adapter. It's basically the same principle as the bell housing. I'm using the mobile version so I don't know how to upload a pic.

 

This part of the trans and these couple bolts?
If this is what you are asking for then I gotta say no to that. I don’t want to pull any parts off the trans itself, just going to make it harder to sell. Only selling both as whole units

 

Yes that's it. Ok no problem.

 

If someone needed the transmission, they already have that piece they could take off their old one. Just in case you change your mind.

 

Just the mount. I went in to the dealer this morning and checked what a new one is. How much you want for it shipped to 91604?

 

The circled part is called the transfer case adapter. The rear transmission mount should attach to this and the crossmember.

I am actually in need of this part, along with the bolts, if you want to part it out.

Anyone needed and replacement transmission should already have this part, FYI.

Let me know if you want to sell it, thanks!