1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Radflo users please help!

Discussion in '2nd Gen. Tacomas (2005-2015)' started by FloTaco, Nov 16, 2013.

  1. Nov 16, 2013 at 3:20 PM
    #1
    FloTaco

    FloTaco [OP] Well-Known Member

    Joined:
    Oct 31, 2013
    Member:
    #115610
    Messages:
    591
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2021 SR DC 4X4
    After installing new Radflo 2.0s last night I have a metal on metal clunk sound on the front PS side going over bumps. As stated in another post I checked every nut and bolt, all are fine and alignment is good too. Disconnected the sway bar too see if the link was causing the noise; it actually got worse which causes me to believe its the lower shock mount... Any one experienced this before? I've used All Pro COs and they never made a sound so this is new to me.-
     

Products Discussed in

To Top