Radio issues after fuse blown

I was recently driving my truck, and in the middle of my trip the radio AC and all the windows quit working. I looked up on this for him and quickly found out that it was a fuse IG1 N02. I ended up replacing my radio as well because I was having issues after the fact of all of this and I am still currently having issues with the new radio where it is intermittently turning off and on. I don’t know if I need to replace another fuse somewhere, or if a connection is bad, but I made sure that all the connections were good. Any advice would be a great help.

 

There is another radio fuse inside the cabin. Left of the steering wheel, you will see a coin tray. Pop that out and you'll find the fuse box.

 

Also, you've changed two variables and it will be difficult to know for sure which one is the problem.

The new radio...was it brand new...did you test it on a good solid power source first? You might be assuming the radio is good and there's another issue when it was the radio the whole time.

 

Fuses don't turn things off and on. So start somewhere else.

 

I replaced the fuse and then the radio still wasnt working but acting really weird. I then replaced the radio and now it works but just the am/fm radio. Usb and the bluetooth is really spotty and goes in and out. The lights on the dash for the speedometer went out and so did the ac control lights. Not sure if this is another fuse that was blown from the get go or not.