1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rear Shock length

Discussion in 'Suspension' started by brs127s, Jun 14, 2011.

  1. Jun 14, 2011 at 1:17 PM

    brs127s [OP] Well-Known Member

    Sep 21, 2010
    O'Fallon, MO
    04 D-Cab 4x4 Limited TRD
    TRD Headers, Aero Turbine AT2525XL Deckplate Mod, TRD tranny cooler, King Coilovers, LR UCAs, Alcan 5 Leaf springs and Bilstein 5100s, Shrockworks front bumper, CBI rear bumper.
    Hey guys, I have searched the forums and read alot of posts, but still feel like my questions haven't been answered. I am upgrading the suspension on my 04 D-cab. Currently I have Monroe Reflex truck shocks with the factory TRD springs and a 1 inch spacer on the front and Monroe Sens-a-Track shocks with a 1 inch block under the rear leaf springs. I will be putting Toytec coilovers on the front. I plan on scrapping the current rear leafs (factory) and blocks, and getting the Alcan 5-leaf springs for the rear. I haven't figured what height I want to set the Toytecs at yet, but I know the Alcans will raise the back end approximately 1 to 1.5 inches. Ideally most would say to get new Bilsteins to go with the new springs, but I don't have very many miles on the rear shocks I currently have. If they could handle the extra lift, I would like to keep them on the truck. The big question is what length do my shocks need to be to handle the lift from the 5 leaf alcans?


Products Discussed in

To Top