Rear wheel hub/bearing..

It has not ended this week.. Got the 4x4 fixed, needed new tires, got those replaced.. Now I think im seeing a leak in the rear right bearing/hub.

I found these..

https://www.1aauto.com/2005-14-toyota-tacoma-wheel-hub-bearing-module-rear-pair/i/1ashs00556

Is this as straight forward as the front? I've replaced both hub assemblies in the front..

Thank you in advance

 

No, the rears are a lot more involved and require a hydraulic press and a special pipe thing that is only for Toyota rear wheel bearings. It also involves some trial and testing to see when the seal collar is pressed on to the proper place.

 

Here's a 1 hour video that shows what all is involved. Not a Taco, but the procedure is the same.

https://www.youtube.com/watch?v=AVhSDnw2ugo

 

Thanks everyone, I'll do some research-

 

If you have a 12 model you don't have to worry about the seal collar .